Steps of Alarm System Installation

When installing and operating the wireless system must comply with the following principles: the battery in a wireless device installed just before registration in the system; wireless device has no communication with the control panel for more than 10 minutes to consume more energy, which shortens the battery life; wireless devices should be installed only after the control panel when it is possible to check the level of the transmitted radio signal – can not be less than 40%; If the desired location the signal level is too low, select another; sometimes enough to move the device a few inches; only after obtaining an optimal level of radio signal device can be mounted on a permanent basis; wireless devices should be mounted high, because it provides a better range of radio communication and eliminates the possibility of accidentally covered by the occupants of the room. how an alarm system notifies an unusual event? The simplest form of reaction system into a unique situation prevailing in the protected object is to start signaling devices (sirens): optical (traffic light), acoustic (with buzzer) or opto-acoustic (combining both forms of signaling). Signals can be mounted indoors or outdoors. The role of the external sounder is to attract the attention of persons likely to respond to emergency situations, internal – mostly bewilderment intruder intensity sound unpleasant to the ear. In advanced systems, this is not enough, so they are equipped with mechanisms and devices for monitoring and notification. The control panel sends the appropriate signals to the receiving device in the monitoring station operated by the security agency. Information collected by the station are...